Need help?Do you have a question about the Bpt Linea Basic YVL 301 and is the answer not in the manual?
General| Number of Buttons | 1 |
|---|---|
| Model | YVL 301 |
| Wiring | 2-wire |
| Operating Temperature | +55°C |
| Call Signal | Electronic |
Details the connection points and wiring for the device's terminal boards.
Explains the purpose and connection of the CN4 connector to the monitor.
Configuration for attenuating the call signal using SW1.
Setting the resistive load termination using SW3.
Configures the device as MASTER or SLAVE using SW8.
Selects the power source (BUS or separate) using SW9.
Defines the function of specific keys as AUX1 and AUX2 using SW10.
Description of the YKT/F table-top mounting accessory.
Procedure to access the programming mode via button A.
Programming the call melody associated with the entry panel.
Programming the call melody associated with the doorbell.
Setting the number of call rings for incoming calls.
To Next Page
