To Next PageTo Next Page
Need help?Do you have a question about the bq Witbox Go! and is the answer not in the manual?
General| Wi-Fi | Yes |
|---|---|
| Ethernet LAN | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Certification | CE, EAC |
| Product color | Translucent, White |
| Internal memory | 8 GB |
| Mobile operating systems supported | Android |
| Engraver module | - |
| Print technology | Fused Filament Fabrication (FFF) |
| Printing material | Polylactic acid (PLA) |
| Layer thickness (min) | - mm |
| Number of printing colors | 1 |
| Maximum build size (WxDxH) | 140 x 140 x 140 mm |
| Filament thickness supported | 1.75 mm |
| Cables included | Micro-USB |
| Included filament roll weight | 0.3 kg |
| Package depth | 350 mm |
| Package width | 405 mm |
| Package height | 540 mm |
| Package weight | 7500 g |
Weight and Dimensions| Depth | 255 mm |
|---|---|
| Width | 300 mm |
| Height | 480 mm |
| Weight | 4800 g |
Download the Zetup app to set up your printer.
Configure and print your own custom objects.
Details about the power button, including ON, OFF, and Reboot functions.
Explanation of the notification LED states for printer status.
Details on the USB connector and power socket for the printer.
Do not discard the original box for potential future use.
Remove all cardboard packaging pieces before starting to print.
Be careful when removing filament as the nozzle reaches high temperatures.
Guidelines for packaging the printer for transport or technical support shipments.
Advises against using extension cords and recommends proximity to power sockets.
