bq witbox 2 User Manual

Witbox 2
Quick start guide

bq witbox 2 Specifications

General

Technology	FDM (Fused Deposition Modeling)
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD Card
Supported Materials	PLA, HIPS
Frame Material	Metal
Display	LCD
Build Volume	297 x 210 x 200 mm (11.7 x 8.3 x 7.9 in)

Summary

Getting Started

Unpacking Your Witbox 2

Power and Transportation

Operating Your Printer

Initial Configuration

Guide to selecting language and initial setup wizard.

Loading Filament

First Test Print Process

Print Bed Preparation

Steps to prepare the print bed for adhesion.

Starting the Print Job

How to select and start a print from the SD card.

Print Configuration Settings

Print Bed Levelling Procedures

Adjusting the Offset

Procedure to set the distance between nozzle and bed.

Auto-levelling and Manual Levelling

Manual Bed Levelling

Step-by-step guide for manual print bed levelling.

Maintenance Fundamentals

Cleaning the Hot-End

Guide to cleaning accumulated material around the nozzle.

Troubleshooting Filament Blockage

Hot-End Maintenance: PTFE Tube Replacement

Printer Operations and Safety Features

Kill Switch Functionality

Firmware and System Resets

Updating Firmware

Troubleshooting Common Print Issues

Filament Loading Problems

Solutions for issues loading filament into the extruder.

Print Adhesion Issues

How to resolve prints not sticking to the bed.

Advanced Troubleshooting and Print Control

Improving Bed Adhesion

Troubleshooting Display and Errors

Temperature Reading Error

Explains causes and solutions for temperature display errors.