Need help?Do you have a question about the bq Witbox and is the answer not in the manual?
General| Print technology | Fused Filament Fabrication (FFF) |
|---|---|
| Printing material | Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.05 mm |
| Number of printing colors | 1 |
| Maximum build size (WxDxH) | 297 x 310 x 200 mm |
| Filament thickness supported | 1.75 mm |
| Certification | EC |
| Product color | Black |
| Viewing window | Yes |
| Housing material | Steel |
| Display technology | LCD |
| Ethernet LAN | No |
| Compatible memory cards | SD |
| Power consumption (typical) | 348 W |
| Bundled software | Marlin, Slic3r, Repetier, Pronterface, Cura, ReplicatorG, Skeinforge |
| Package depth | 547 mm |
| Package width | 643 mm |
| Package height | 647 mm |
Weight and Dimensions| Depth | 388 mm |
|---|---|
| Width | 505 mm |
| Height | 450 mm |
| Weight | 28000 g |
To Next Page
