EasyManua.ls Logo

bq Witbox - FCC Notification; Declaration of Conformity

bq Witbox
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
78
WitboxUser Manual
DECLARATION OF CONFORMITY
Mundo Reader, S.L.
Pol. Ind. Európolis
Calle Sofía, 10
28232 Las Rozas - Madrid (Spain)
Tel. +34 91 787 58 59
CIF: B85991941
Made in Spain
I hereby declare that the:
Witbox
Complies with the provisions of Directive 2006/42/CE and the following harmonised
standards:
UNE EN ISO 12100-1 and 2
EN ISO 14121-1:2007
EN 60204-1:2007
UNE EN 13849-1:2007
Madrid, December 2013.
Alberto Méndez Peydró
CEO
Firmware 1.3
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.—Consult the dealer or an experienced radio/TV technician for help.
In addition, this equipment complies with FCC radiation exposure limits set forth for an
occupational / controlled environment. The FCC limitation for Power density has been set for the
frequency of operation of this module as 1.0mW/cm2. The BQ410 has maximum power density of
0.0019mW/cm
2
at 20cm from the antenna. This equipment should be operated with a minimum
distance of 20cm between the antenna and your body. Additional information on SAR and RF
Exposure can be obtained off the FCC website at: • www.fcc.gov/oet/rfsafety

Other manuals for bq Witbox

Related product manuals