INTRODUCTION
What is a 3D printer?
A 3D printer (see g. 1.1) is a device that is able to create solid three-dimensional
objects using a design produced on a computer. Currently, there are various
technologies that make this possible. Your bq Witbox uses the method known as Fused
Filament Fabrication (FFF), which builds objects by adding one layer of melted polymer
lament on top of another until the item has been completed.
Online resources for the Witbox
You can nd the most up-to-date version of this manual in electronic format on our
website:
www.bq.com/gb/downloads-witbox.html
We’ve also provided a series of instructional videos that will help you get the most out
of your Witbox desktop printer:
www.mibqyyo.com/videos/2014/01/16/witboxprimerospaso/
Figure 1.1Diagramofa3Dprinter
To Next Page
Loading...
