bq Witbox - Getting Started; Box contents

7
WitboxUser Manual
English
GETTING STARTED
Box contents
Witbox 3D printer
Print base
Set of two keys
Two side panels and one top panel
USB cable
Power cable
Spool of 1.75 mm PLA lament
Metal spool-holder
SD card (preloaded with 3D test models)
Printed test object
Four underside supports
Maintenance kit, comprising:
One replacement Hot-End
Two cleaning needles
Three Allen keys (1.5, 2.5 and 4 mm)
Spatula
Wire brush