bq Witbox - Basic glossary

English
10
WitboxUser Manual
Basic glossary
1
LCD screen:Backlitbluescreenthatdisplaysinformationregardingthestatusof
the device.
2
Control wheel:Metalwheelusedforscrollingthroughthemenus.
3
SD card slot: Slot located inside the printer at the rear of the control panel, where
the SD card is inserted.
4
Print base: Rectangle of thick glass onto which the object is printed.
5
Hot-End:Metalpartthroughwhichthemeltedplasticisextruded;socalledbecause
itreacheshightemperatureduringoperation.
6
Extruder:DevicecomprisingtheHot-End,thelament-feedermotorandthefan.
7
Filament spool:Spoolofthermoplasticmaterialwithathicknessof1.75mm.
8
PLA:Thematerialthatthelamentismadeof.
9
Spool holder:Metalpartthatsupportsthelamentspool,locatedattherearofthe
printer.
10
Fibonacci guide tube:Plastictubethatguidesthelamenttowardstheextruder.Its
shapeallowsittoadapttothemovementoftheprinterandprotectsthelament.
11
Power socket:Locatedatthebackoftheprintertowardsthebottom.
12
On/Off switch: Dual-position switch for turning the Witbox on and off.
13
USB port:ConnectorfortheUSBcable;locatedontheright-handsideoftheprinter.