Electronics
Ramps 1.4
Mega 2560
LCD screen with rotary encoder and push-button navigation
Non-heated glass base, size A4 (29.7 x 21.0 cm)
348W input power
100K thermistors in the extruder
40W 12V heater cartridge
Software
Marlin-derived rmware
Recommended software environment: Cura
Permitted le types: .gco, .gcode
Compatible operating systems: Windows XP and later
Mac OS X and later
Linux
Connections
Standard SDHC card reader
4 GB SD card included
Type-B USB port
Materials
1.75 mm PLA lament
Operating conditions
Optimum operating temperature between 15 °C and 25 °C
Other
Assembled printers can be stacked one on top of the other, avoiding the need for
additional shelving
Safety-locking door
Rear-loading lament system inspired by the Fibonacci spiral
To Next Page
Loading...
