SETUP 2
5
S05299-10
– Remove the front rider's seat. ( p. 6)
– Remove the black ignition key and KEYCODECARD and keep in a
safe place for the handover.
–
Remove cover
6
.
–
Plug in the connector of starter relay
7
.
– Mount the cover.
– Charge the 12-V battery. ( p. 10)
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
Info
The first charging process may take longer with a new
12-V battery.
– Remove the protective film.
– Refuel. ( p. 12)
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
To Next Page
Loading...
