Bradley HN300 - User Manual

Installation
P.O. Box 309
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
+1 262 251 6000
www.bradleycorp.com
215-466 Rev. H: ECO 19-03-031
© 2019 Bradley
Page 1 of 6 11/15/2019
HN300 ADA Compliant
In-Wall Shower
Table of Contents
Pre-Installation Information ..........................2
Components and Shower Stall Dimensions .............2
Installation Instructions ...........................3–5
Cleaning Instructions ...............................5
Repair Parts......................................6
IMPORTANT
Read the entire installation manual to ensure proper installation of your HN300 shower. When finished
with the installation, file this manual with the owner maintenance department. Compliance and conformity
to local codes and ordinances is the responsibility of the installer.
Consult local building and plumbing codes prior to installation. Should these codes differ from the
information in the Manual, follow the local codes. Inquire with governing authorities for additional local
requirements.
Separate parts from packaging and make sure all parts are accounted for before discarding packaging
material. If any parts are missing, do not begin installation until you obtain the missing parts.
Product warranties may be found under "Products" on our website at bradleycorp.com
HN300 Valve Left/Seat Right Shown

Summary

Important Installation Guidelines

Pre-Installation Information

Overview of HN300 Shower

Provides an overview of the HN300 shower's features and ADA compliance.

Components and Required Supplies

Lists all components, materials, and supplies needed for a successful installation.

HN300 Shower Installation Steps

Step 1: Rough-in Piping for Shower

Details the initial piping rough-in process for the shower valve and components.

Step 2: Install Showerhead

Instructions for installing the showerhead onto the supply piping and wall.

Step 3: Install Backflow Preventer and Hose Spray

Guide for connecting the backflow preventer and hand-held hose spray.

Step 4: Install Hand-Held Hose Bracket

Steps for mounting the hand-held hose bracket to the wall.

Step 5: Install Recessed Soap Dish

Procedure for placing and securing the recessed soap dish.

Step 6: Install Grab Bar

Instructions for installing the grab bar to the wall.

Step 7: Mount Shower Seat

Follow separate instructions for mounting the shower seat.

Step 8: Install Curtain Rod

Steps for measuring, cutting, and mounting the shower curtain rod.

Cleaning Instructions

Repair Parts Information

Diverter Valve Repair Parts

Lists part numbers and descriptions for the diverter valve assembly.

HN300 Shower Components Repair Parts

Lists part numbers for major HN300 shower components.

Shower Curtain Repair Parts

Lists part numbers for shower curtain rod and hooks.

Bradley HN300 Specifications

General

Brand	Bradley
Model	HN300
Category	Bathroom Fixtures
Language	English