Bradley TouchTime - User Manual

1 of 4 Bradley • 215-1369-41 Rev. A: ECN 17-03-010
Operation and Service Guide: Showers
P.O. Box 309 • Menomonee Falls, WI 53052-0309
1.800.BRADLEY • 1.262.251.6000 • bradleycorp.com
Column Showers - TouchTime
®
(DC)
WARNING
The TouchTime activation must be connected with a 12V DC plug in adapter.
Connections to 110 VAC can cause personal injury and will result in damage
to the electronics.
Make sure that all water supply lines have been flushed and then completely
turned off before beginning installation. Debris in the supply lines can cause
valves to malfunction.
DO NOT put the 120VAC/12VDC plug in adapter in the shower room. Check
local codes and ordinances for proper location and connection requirements.
Conformity to local codes is the responsibility of the installer.
NOTICE
To help prevent electrical damage to the unit, Bradley recommends the use of
a surge protection. The type of surge protection required and its usage is the
responsibility of the installer/electrician.
Water supply requires a flowing pressure of at least 20 psi, but no greater
than 80 psi.
IMPORTANT
Check local codes and ordinances for proper location and connection
requirements. Compliance and conformity to local codes and ordinances is
the responsibility of the installer.
Read this entire service guide to ensure proper installation and use of the
TouchTime
®
DC valve. When finished with the service, file this manual with
the owner or maintenance department.
Separate parts and packaging and make sure all parts are accounted for
before discarding any packaging. If any parts are missing, do not begin
service until obtaining the missing parts.

Summary

Column Showers - TouchTime (DC) Operation and Safety

General Warnings and Notices

Critical safety warnings for electrical connections and installation, plus notices regarding water pressure and surge protection.

Important Installation and Service Guidelines

Key instructions on checking local codes, verifying electrical sources, and ensuring all parts are present before service.

TouchTime System Description and Components

TouchTime System Overview

Explains how the TouchTime column controls water flow using a timer module and solenoid valve for activation.

Supplies and Installation Requirements

Lists required supplies, including power adapters, and provides crucial warnings for installation safety.

Electrical Connections and Wiring

Wiring Diagram Overview

Illustrates the system's wiring, showing the solenoid, TouchTime module, and pushbutton connections.

Making Electrical Connections

Step-by-step guidance for installing the plug-in adapter and connecting cables to the TouchTime module.

TouchTime Module Adjustment and Testing

Adjusting the TouchTime Module Settings

Details on setting the selector switch for different timeout periods and the 24-hour flush function.

Testing the TouchTime Module

Procedure for testing the module's functionality, including solenoid cycling and LED indicators.

Bradley TouchTime Specifications

General

Brand	Bradley
Model	TouchTime
Category	Plumbing Product
Language	English