Brady BMP21 - Page 5

BMP™21 1-3
1. Press Power .
2. Press Label Type.
3. Select Wire and press Enter .
4. Select .75” (16-10AWG) and press Enter .
5. Press Font Size, select 6pt. and press Enter .
6. Type: 12345 and press Print.
7. Press the side buttons to Cut.
1. Start with a clear display.
2. Press Label Type.
3. Select Banner Landscape and press Enter .
4. Type: 12345, press , press Serial and Increment
by 01.
5. Arrow down to End and right arrow until screen reads
12347 or type 347.
6. Arrow down to Copies and right arrow until screen reads
02 or type 2 and press Enter .
7. Press Print.
8. Either Cut or Print the 2nd thru 6th label.
Label Selection Chart
Application Nylon
Outdoor
Vinyl
Perma-
Sleeve
Polyester
Self Lam
Vinyl
Smooth Surfaces
XX X
Textured Surface
XX
Cable and Wire
XX X
High Textured Surface
X
Terminal Blocks
X
Patch Panel
X
General ID
XX X
Creating Wire Labels
Serialization
12345 12345 12346 12346 12347 12347