Brady IP™ Printer Operator/Configuration
3
Safety
■ The Brady IP Printer is configured for voltages of 100 to 240 V ~, 50 to 60
Hz. Connect only to a grounded power outlet.
■ The Brady IP Printer may only be used in a dry environment, do not expose
it to moisture (water, mists, etc.).
■ If the Brady IP Printer is operated with the cover open, ensure that clothing,
hair, jewelry etc. do not come into contact with the exposed rotating parts.
■ During the print process, the print assembly can become hot. Do not touch
the print assembly during operation, and allow the assembly to cool down
before changing material and before disassembly.
■ Perform only those actions described in this manual. Work going beyond
this may only be performed by trained personnel or service technicians.
A WARNING
Entanglement Hazard
• MOVING PARTS can entangle.
• AVOID wearing jewelry or loose fitting clothing.
• ALWAYS tie back long hair.
A DANGER
Electric Shock Hazard
• DO NOT open the Brady IP Printer casing.
• UNPLUG power cord before servicing.
• CONTACTING power supply can cause
electrocution.
To Next Page
Loading...
Need help?
General
