Need help?Do you have a question about the Brady BBP81 and is the answer not in the manual?
General| Printer Type | Industrial Label Printer |
|---|---|
| Print Technology | Thermal Transfer / Direct Thermal |
| Resolution | 300 dpi |
| Media Types | Labels, Tags, Wristbands |
| Cutter | Optional |
| Display | LCD |
| Supported Ribbon Types | Wax, Wax/Resin, Resin |
| Power Requirements | 100-240V AC, 50/60 Hz |
| Print Speed | 10 inches per second (254 mm/s) |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Linux |
| Memory | 128 MB |
| Supported Label Materials | Paper, Polyester, Polypropylene |
| Operating Temperature | 40°F to 104°F (5°C to 40°C) |
Covers essential pre-setup tasks, unpacking, installation, connectivity, and power connection.
Step-by-step instructions for loading media and ribbon correctly into the printer.
Procedures for auto calibration and adjusting printhead pressure for optimal print quality.
Steps to enter and exit setup mode for configuring printer parameters via the control panel.
Overview and methods for viewing and modifying printer settings via the control panel.
Details on adjusting print darkness, speed, media type, print mode, and other essential settings.
Recommended cleaning schedule and detailed steps for cleaning printer parts.
To Next Page
