Need help?Do you have a question about the Brainboxes ES-246 and is the answer not in the manual?
General| Model | ES-246 |
|---|---|
| Type | Ethernet to Serial Adapter |
| Ports | 4 |
| Ethernet Interface | 10/100 Mbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Mark, Space |
| Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
| Connector | RJ45 |
| Connector Type | Screw Terminal |
| Operating System Support | Windows, Linux |
| Power Supply | 9-30V DC |
| Mounting | DIN Rail |
| Interface | RS-232 |
| Baud Rate | 50 bps to 921.6 kbps |
Locate the COM port assigned to your serial device via the Boost.LAN Manager.
Modify the device's IP address through the Boost.LAN Manager's Device Info panel.
Select a new COM label from the dropdown menu in Boost.LAN Manager settings.
Diagrams showing the pin configurations for RS232 and RS422/485 DB9 serial ports.
Pin assignments for serial terminal blocks and power terminal blocks.
Details on power jack plug types used for Brainboxes ES devices.
To Next Page