EasyManua.ls Logo

BRAMIDAN X25 - Page 8

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Personsikkerhed USA.fm Page 4Bale press
The baler must not be used for compressing wet or oily material, foam rubber, and
other strong expanding materials. An example of strong expanding materials could be
plastic rolls or the equivalent, which would build up strong spring forces during
compression. Another example could be bubble wrap or anything with air trapped
inside.
The baler must not be used with explosive and inflammable materials, see chapter 11,
Filling and compression.
Operation of the baler must always occur in accordance with the local regulations for use of
technical equipment (machines), which may vary from country to country.
It is recommended to use original spare parts.
Avoid coming in contact with hydraulic oil through inhalation or skin contact.
The hydraulic oil may be hotter than 158 fahrenheit, and can therefore cause scalding.
A jet from a hydraulic hose may cause serious damage to skin and eyes.
For B-series, never climb up on the baler.
WARNING
DANGER
DANGER
WARNING

Table of Contents

Related product manuals