EasyManua.ls Logo

Brandt TI2FSOFT - Child Lock Mode; Switching Off the Appliance; Cleaning and Maintenance; Cleaning the Induction Cooker

Brandt TI2FSOFT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
When time is over, digital screen will show “H” and you will hear a sight noise. System will
switch off automatically. To change time when using device, press timer button (3) then
+/- buttons. To cancel the timer function, press again on the timer button (3) during few
seconds. Timer light will switch off.
Child lock mode
To lock the control pads during the cooking, press on Child lock button (10). The
indicator<<Lo>> will appear on the screen. In this case, only the On/Standby button (7)
can be used to switch off the appliance. If you press the On/Standby button while in child
lock mode, the screen will show 'H' or 'L', and the appliance is OFF. To unlock the control
panel, press On/Standby button again and then press again on "lock" button during 3
seconds.
d) Switch off the appliance
After use, the electric hob is hot, the buzzer rings and the indicator « H » flashes on the
screen. To switch off the appliance, press on the On/Standby button (7), then unplug the
socket.
Please, refer below table for wattage:
Level 1 2 3 4 5 6 7 8 9 10
Wattage(W)
Left Burner
120 300 500 800 1000 1200 1400 1600 1800 2000
Wattage(W)
Right
Burner
120 200 400 500 700 900 1000 1100 1300 1400
4)CLEANING AND MAINTENANCE
a) Cleaning the induction cooker
Switch off and unplug the appliance.
Let it cool down before cleaning.
Regarding the glass-ceramic and the control panel :
Light dirt: clean with a soft wet cloth.
Oily dirt: clean with a soft wet cloth dipped with little toothpaste or neutral
detergent until the removal of residuals.
Do not use any flammable, acidic or alkaline materials or substances near the
induction cooker, as this may reduce the service life of the induction cooker and
pose a fire risk when the induction cooker is turned on.
Note: during the cleaning, never clean the surface of the induction cooker with a
rigid brush.

Related product manuals