What to do if GFI protected outlet trips with Branson 1800 Ultrasonic Jewelry Cleaner?
If your Branson Ultrasonic Jewelry Cleaner unit is plugged into a GFI protected outlet and it trips, connect the unit to an unprotected outlet.
Why my Branson 1800 Ultrasonic Jewelry Cleaner won't start?
There are several possible causes if your Branson Ultrasonic Jewelry Cleaner won't start: 1. Ensure the unit is plugged into a functioning electrical outlet. 2. If you have an M/MH model, turn the mechanical timer clockwise. 3. For CPX/CPXH models, press the power switch to the ON position. 4. If you have a CPX/CPXH model and the On/Standby key is malfunctioning or the fuse is blown, call the nearest authorized service center.
What to do if Branson 1800 Ultrasonic Jewelry Cleaner does not reach set temperature?
If your Branson Ultrasonic Jewelry Cleaner operates but does not reach the set temperature, it may be due to a malfunctioning heater or sensor components. Call the nearest authorized service center.
Why my Branson 1800 operates but does not heat solution?
If your Branson Ultrasonic Jewelry Cleaner operates but does not heat the solution, it could be due to several reasons: * The heater may be malfunctioning, contact an authorized service center. * If you have an MH model, ensure the HEAT is turned ON. * For CPXH models, if the HEAT is not set properly or the membrane is malfunctioning, contact an authorized service center.
General| Brand | Branson |
|---|---|
| Model | 1800 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Precautions to prevent electrical hazards during operation and maintenance.
Guidelines to prevent injury or damage to the unit and surroundings.
Initial preparation steps before operating the M Series ultrasonic bath.
Detailed explanation of the controls and functions for the M Series.
Instructions for operating the M Series ultrasonic bath, including degassing and cleaning.
Initial preparation steps before operating the MH Series ultrasonic bath.
Detailed explanation of the controls and functions for the MH Series.
Instructions for operating the MH Series ultrasonic bath, including degassing and cleaning.
Initial preparation steps before operating the CPX Series ultrasonic bath.
Detailed explanation of the controls and functions for the CPX Series.
Instructions for operating the CPX Series ultrasonic bath, including degassing and cleaning.
Initial preparation steps before operating the CPXH Series ultrasonic bath.
Detailed explanation of the controls and functions for the CPXH Series.
To Next Page
