What to do if GFI protected outlet trips with Branson 2800 Ultrasonic Jewelry Cleaner?
If your Branson Ultrasonic Jewelry Cleaner unit is plugged into a GFI protected outlet and it trips, connect the unit to an unprotected outlet.
Why my Branson 2800 won't start?
There are several possible causes if your Branson Ultrasonic Jewelry Cleaner won't start: 1. Ensure the unit is plugged into a functioning electrical outlet. 2. If you have an M/MH model, turn the mechanical timer clockwise. 3. For CPX/CPXH models, press the power switch to the ON position. 4. If you have a CPX/CPXH model and the On/Standby key is malfunctioning or the fuse is blown, call the nearest authorized service center.
What to do if Branson 2800 Ultrasonic Jewelry Cleaner does not reach set temperature?
If your Branson Ultrasonic Jewelry Cleaner operates but does not reach the set temperature, it may be due to a malfunctioning heater or sensor components. Call the nearest authorized service center.
Why my Branson Ultrasonic Jewelry Cleaner operates but does not heat solution?
If your Branson Ultrasonic Jewelry Cleaner operates but does not heat the solution, it could be due to several reasons: * The heater may be malfunctioning, contact an authorized service center. * If you have an MH model, ensure the HEAT is turned ON. * For CPXH models, if the HEAT is not set properly or the membrane is malfunctioning, contact an authorized service center.
General| Brand | Branson |
|---|---|
| Model | 2800 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Overview of available Ultrasonic Bath models and their tank capacities.
Explanation of how model numbers are structured for different configurations.
Detailed specifications for North American models, including size, weight, and power.
Detailed specifications for European models, including size, weight, and power.
Detailed specifications for Japanese models, including size, weight, and power.
Detailed specifications for Chinese models, including size, weight, and power.
Fuse specifications for North American and Japanese ultrasonic bath models.
Fuse specifications for European and Chinese ultrasonic bath models.
Guide to operating M Series ultrasonic bath, including setup, controls, and degassing.
Guide to operating MH Series ultrasonic bath, including setup, controls, and degassing.
Guide to operating CPX Series ultrasonic bath, including setup, controls, LCD, and degassing.
Guide to operating CPXH Series ultrasonic bath, including setup, controls, LCD, and degassing.
Instructions for safely draining the ultrasonic bath unit.
Tips for improving ultrasonic bath performance, including tank and temperature management.
Information on types of cleaning solutions, their strengths, and what they remove.
Table detailing how different cleaning agents affect various metal types.
Guide to identifying and resolving common problems with the ultrasonic bath.
Procedure for testing the ultrasonic cavitation level using a glass slide.
To Next Page
