Branson 2400h - Disassembling Hst (Hst Type)

TRANSMISSION
KUKJE MACHINERY CO., LTD.
88
5. CHECKING, DISASSEMBLING AND SERVICING
2) Disassembling HST (HST Type)
*. PART NAME
1) Neutral holder 2) Neutral holder arm
3) Neutral adjuster 4) Spacer
< Neutral holder and neutral holder arm >
1. Place parting marks on the neutral adjuster(3)
and the neutral holder arm(2).
2. Remove the neutral holder arm(2) with neutral
adjuster(3).
3. Remove the screw and pull out the neutral
holder(1).
▷ Reassembling
9 Align the parting marks and install the neutral
adjuster and the neutral holder arm.
9 Be sure to install the spacer(4).
Neutral adjuster
lock screw
23.6 to 27.4 Nm
2.4 to 2.8 kgfm
17.4 to 20.3 ft-lbs
Tightening
torque
Neutral holder
mounting screw
23.6 to 27.4 Nm
2.4 to 2.8 kgfm
17.4 to 20.2 ft-lbs
< Charge pump >
1. Remove the charge pump mounting screws, and
remove the charge pump assembly(1) from the
HST housing.
▶ NOTE
1) Take care not to damage the O-ring.
Tightening
torque
Charge pump
mounting screw
23.5 to 27.5 Nm
2.4 to 2.8 kgfm
17.4 to 20.3 ft-lbs
*. PART NAME
1) Charge pump assembly
(1)
(2)
(3)
(2)
(3)
(4)
(1)