Braun 5090cc - Trouble-Shooting; Shaver Start Issues; Shaver Charging and Display Issues; Charging Initiation Issues

31
Trouble-Shooting
Problem Possible reason Remedy
SHAVER
Shaver does
not start when
pressing the
start button.
1. Travel lock is
activated
2. Wet&dry model
5040s
1. Press the on/off switch for 3
seconds to unlock the shaver
2. Unplug the shaver. This appliance
can only be operated cordless.
Shaver does
not charge
completely and
keeps blinking.
Ambient temperature
is out of valid range
Recommended ambient temperature
for charging is 5°C to 35°C.
Charging does
not start when
connected to
power socket
or put in
Clean&
Charge station.
1. Shaver is not
placed properly in
the Clean&Charge
station.
2. Sometimes
charging could
start delayed (e.g.
after long storage).
3. Ambient
temperature is out
of valid range.
1. Contacts of shaver need to align
with contacts in the
Clean&Charge station.
2. Wait a few minutes, if charging will
start automatically.
3. Recommended ambient
temperature for charging is 5°C to
35°C.
Unpleasant
smell from the
shaver head.
1. Shaver head is
cleaned with water.
2. Cleaning cartridge
is in use for more
than 8 weeks.
1. When cleaning the shaver head
with water only use hot water and
from time to time some liquid
soap (without abrasive
substances). Remove foil & cutter
cassette to let it dry.
2. Change cleaning cartridge at least
every 8 weeks.
Battery
performance
dropped
significantly.
1. Shaver head is
regularly cleaned
with water but not
lubricated.
2. Foil and cutter are
worn which
requires more
power for each
shave.
1. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil once
a week for lubrication.
2. Renew foil & cutter cassette.
91881631_5090cc_Series_5_CN/KR.indd 3191881631_5090cc_Series_5_CN/KR.indd 31 20.07.18 09:3520.07.18 09:35
Business Use - P&G AUTHORIZED POA-00058748 Rev 001 Effective Date 2018-07-26 Printed 2018-10-31 Page 31 of 36