32
Shaving
performance
dropped
significantly.
1. Shaving system is
clogged.
2. Foil and cutter are
worn.
1. Soak the foil & cutter cassette into
hot water with a drop of liquid dish
soap. Afterwards rinse it properly
and tap it out. Once dry apply a
drop of light machine oil on the
foil.
2. Renew foil & cutter cassette.
Battery
segments
in the display
are skipped
with decreasing
battery
capacity.
Foil and cutter are
worn which requires
more power for each
shave.
– Renew foil & cutter cassette
– Regularly oil the shaving system,
especially when cleaning with
water only.
Shaver head is
damp.
1. Drying time after
automatic cleaning
was too short.
2. Drain of the
Clean&Charge
Station is clogged.
3. Cleaning cartridge
has been used for
quite a while.
1. Clean directly after shaving to
allow enough time for drying.
2. Clean the drain with a wooden
toothpick
3. The ethanol/isopropanol
proportion has decreased while
the oil proportion has increased.
Remove residue with a cloth.
91881631_5090cc_Series_5_CN/KR.indd 3291881631_5090cc_Series_5_CN/KR.indd 32 20.07.18 09:3520.07.18 09:35
Business Use - P&G AUTHORIZED POA-00058748 Rev 001 Effective Date 2018-07-26 Printed 2018-10-31 Page 32 of 36
To Next Page
Loading...
