What to do if Braun 5140s charging does not start when connected to power socket?
If charging does not start when you connect your Braun Electric Shaver to a power socket, it could be due to a few reasons. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C.
Why has my Braun 5140s battery performance dropped significantly?
If your Braun Electric Shaver's battery performance has significantly decreased, it could be because the foil and cutter are worn, requiring more power for each shave. Replacing the Foil & Cutter cassette is recommended. Alternatively, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
Why has my Braun Electric Shaver shaving performance dropped significantly?
If you notice a significant drop in your Braun Electric Shaver's shaving performance, it might be due to worn foil and cutter. Replacing the Foil & Cutter cassette can resolve this issue. Another possible cause is a clogged shaving system. To address this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and apply a drop of light machine oil to the foil once it's dry.
What to do if cleaning does not start when pressing the start button on Braun Electric Shaver?
If cleaning does not start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, ensure the shaver is correctly placed in the station, pushing it to the rear so that the contacts align. Also, if the cleaning cartridge doesn't contain enough cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again.
Why is there an unpleasant smell from the Braun 5140s Electric Shaver head?
If you notice an unpleasant smell from your Braun Electric Shaver head, it could be due to cleaning the shaver head with water. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, if the cleaning cartridge has been in use for more than 8 weeks, replace it.
Why is the Braun Electric Shaver head damp?
If your Braun Electric Shaver head is damp, it could be because the drying time after automatic cleaning was too short; clean directly after shaving to allow enough time for drying. Another reason may be that the drain of the Clean&Charge Station is clogged; clean the drain with a wooden toothpick.
Why is there increased consumption of cleaning fluid in my Braun 5140s Electric Shaver?
If you are experiencing increased consumption of cleaning fluid with your Braun Electric Shaver, the drain of the Clean& Charge station might be clogged. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
General| Brand | Braun |
|---|---|
| Model | 5140s |
| Category | Electric Shaver |
| Language | English |
To Next Page
