EasyManua.ls Logo

Braun 5190cc - User Manual

Braun 5190cc
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.braun.com
5197cc
5195cc
5190cc
5160s
5147s
5145s
5140s
Series 5
Type 5769
Modèle 5769
Modelo 5769
m
91113594/ X-16
91113594_Series 5-2_NA_S1.indd 191113594_Series 5-2_NA_S1.indd 1 05.10.16 11:3405.10.16 11:34
Stapled booklet, 120 x 170 mm, 48 pages (incl. 8 pages cover), 2/2 = cyan + black
CSS APPROVED Effective Date 14Oct2016 GMT - Printed 05Apr2017 Page 1 of 48

Questions and Answers

  • C
    Cheryl SmithAug 18, 2025
    What to do if Braun Electric Shaver charging does not start when connected to power socket?
    • C
      Christopher WrightAug 18, 2025
      If charging does not start when you connect your Braun Electric Shaver to a power socket, it could be due to a few reasons. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C.
  • C
    carriethompsonAug 20, 2025
    What to do if my Braun 5190cc charging does not start?
    • M
      Michael SpearsAug 20, 2025
      If your Braun Electric Shaver is not charging when connected to the power socket, it could be due to a few reasons. Sometimes charging could start delayed, so wait a few minutes to see if charging starts automatically. Also, ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C. Finally, check that the special cord set is properly plugged in and snaps into place.
  • K
    Kristina TorresAug 23, 2025
    What to do if cleaning does not start on my Braun Electric Shaver?
    • S
      Susan ThompsonAug 23, 2025
      If your Braun Electric Shaver cleaning does not start when pressing the start button, ensure that the shaver is properly placed in the Clean&Charge Station, pushing it to the rear so that the contacts align. If the cleaning cartridge doesn't contain enough cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again.
  • L
    lwalkerAug 26, 2025
    Why has my Braun 5190cc battery performance dropped significantly?
    • H
      Haley HuberAug 26, 2025
      If your Braun Electric Shaver's battery performance has significantly decreased, it could be because the foil and cutter are worn, requiring more power for each shave. Replacing the Foil & Cutter cassette is recommended. Alternatively, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
  • H
    hestermatthewAug 27, 2025
    Why is my Braun Electric Shaver head damp?
    • S
      Sara BakerAug 28, 2025
      If your Braun Electric Shaver head is damp, it could be because the drying time after automatic cleaning was too short, so try to clean directly after shaving to allow more drying time. Another reason might be that the drain of the Clean&Charge Station is clogged, so clean the drain with a wooden tooth-pick.
  • M
    Michael MercadoAug 30, 2025
    Why is my Braun 5190cc Electric Shaver using more cleaning fluid?
    • S
      steven83Aug 30, 2025
      Increased consumption of cleaning fluid in your Braun Electric Shaver can be caused by a clogged drain in the Clean& Charge station. Clean the drain with a wooden tooth-pick and regularly wipe the tub clean.
  • J
    Jeffrey KramerSep 2, 2025
    Why has my Braun Electric Shaver shaving performance dropped significantly?
    • J
      jennifer60Sep 2, 2025
      If you notice a significant drop in your Braun Electric Shaver's shaving performance, it might be due to worn foil and cutter. Replacing the Foil & Cutter cassette can resolve this issue. Another possible cause is a clogged shaving system. To address this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and apply a drop of light machine oil to the foil once it's dry.
  • E
    ericbakerSep 4, 2025
    What to do if cleaning does not start when pressing the start button on Braun Electric Shaver?
    • H
      Holly JenningsSep 4, 2025
      If cleaning does not start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, ensure the shaver is correctly placed in the station, pushing it to the rear so that the contacts align. Also, if the cleaning cartridge doesn't contain enough cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again.
  • T
    toddbaileySep 6, 2025
    Why is there an unpleasant smell from the Braun 5190cc Electric Shaver head?
    • B
      Bernard CochranSep 7, 2025
      If you notice an unpleasant smell from your Braun Electric Shaver head, it could be due to cleaning the shaver head with water. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, if the cleaning cartridge has been in use for more than 8 weeks, replace it.
  • N
    noblescottSep 9, 2025
    Why is the Braun Electric Shaver head damp?
    • K
      Katie FigueroaSep 10, 2025
      If your Braun Electric Shaver head is damp, it could be because the drying time after automatic cleaning was too short; clean directly after shaving to allow enough time for drying. Another reason may be that the drain of the Clean&Charge Station is clogged; clean the drain with a wooden toothpick.

Braun 5190cc Specifications

General IconGeneral
BrandBraun
Model5190cc
CategoryElectric Shaver
LanguageEnglish

Related product manuals