EasyManua.ls Logo

Braun 5694 - Charging and Cleaning Procedures (English); Automatic and Manual Cleaning (English)

Braun 5694
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Charging and cleaning the shaver
Insert the shaver head with the front showing and released head lock (10) into the
Clean&Renew. The contacts (17) on the back of the shaver will align with the contacts
(3) in the cleaning station. Important: The shaver needs to be dry and free from
any foam or soap residue!
If required, the Clean&Renew station will automatically charge the shaver. The hygiene
status of the shaver will also be analyzed and one of the following cleaning program
indicators (5) will light up:
shaver is clean
short economical cleaning required
normal level of cleaning required
high intensive cleaning required
If the station selects one of the required cleaning programs, it will not start unless
you press the start button (4). For best shaving results, we recommend cleaning
after each shave.
Each cleaning program consists of several cycles, where cleaning fl uid is fl ushed
through the shaver head. Depending on your Clean&Renew station model and/
or program selected, the cleaning time takes up to 16 minutes. Leave the shaver
in the station for drying. It takes several hours until remaining moisture evaporates
depending on the climatic conditions.
When the program is fi nished, the blue indicator will light up.
Stand-by mode
10 minutes after completing the charging or cleaning session, the Clean&Renew
station switches to the stand-by mode: The indicators of the Clean&Renew station
turn off .
Shaver display
The shaver display (16) shows the charge status of the battery.
Charging lights (16a)
The green charging lights show the charge status of the batteries. The green charging
light blinks when the shaver is being charged or switched on. When the battery is
fully charged, all green charging lights shine permanently, provided the shaver is
connected to an electrical outlet. Some minutes after completing the charging, the
shaver switches to the stand-by-mode: The display turns off .
Low-charge light (16b)
The red low-charge light fl ashes when the battery is running low. The remaining
battery capacity is suffi cient for 2 to 3 shaves
91508132_7760cc_JP.indd 2691508132_7760cc_JP.indd 26 24.07.17 15:2824.07.17 15:28
CSS APPROVED Effective Date 27Jul2017 GMT - Printed 04Sep2017 Page 26 of 34

Related product manuals