37
Shaving
performance
dropped
significantly.
1. Foil and cutter are
worn.
2. Shaving system is
clogged.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette into
hot water with a drop of dish liquid.
Afterwards rinse it properly and tap it
out. Once dry apply a drop of light
machine oil on the foil.
Shaver head is
damp.
1. Drying time after
automatic cleaning
was too short.
2. Drain of the
Clean & Charge station
is clogged.
1. Clean directly after shaving to allow
enough time for drying.
2. Clean the drain with a wooden
toothpick.
Clean & Charge Station
Cleaning does
not start when
pressing the
start button.
1. Shaver is not placed
properly in the
Clean & Charge
Station.
2. Cleaning
cartridge
does not contain
sufficient cleaning fluid
(display blinks red).
3. Appliance is in
stand-by mode.
1. Insert shaver into the Clean & Charge
Station and push it to the rear side of
the station (contacts of the shaver
need to align with contacts in the
station).
2. Insert new cleaning cartridge.
Press the start button again.
3. Press the start button again.
Increased
consumption of
cleaning fluid.
Drain of the Clean &
Charge station is
clogged.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
90687373_83XX_W&D_CC&SOLO_JP.indd 3790687373_83XX_W&D_CC&SOLO_JP.indd 37 02.05.19 13:2402.05.19 13:24
Business Use - P&G AUTHORIZED POA-00127460 Rev 001 Effective Date 2019-05-07 Printed 2020-02-06 Page 37 of 40
To Next Page
Loading...
