EasyManua.ls Logo

Braun 720s-7 - User Manual

Braun 720s-7
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
720s-7
www.braun.com
Type 5694
Series 7
97187086_720s-7_CEEMEA_S1.indd 1 27.11.14 14:48
Stapled booklet, 110 x 200 mm, 94 p (incl. 6 p cover), 2/2c = HKS43N + black
CSS APPROVED Effective Date 5Dec2014 GMT - Printed 24Nov2015 Page 1 of 94

Questions and Answers

  • W
    William MendozaSep 18, 2025
    Why are battery segments skipped in the display of my Braun 720s-7?
    • L
      Lisa FrederickSep 18, 2025
      Skipped battery segments on your Braun Electric Shaver's display, while the battery capacity decreases, often indicate that the foil and cutter are worn, requiring more power for each shave. To fix this, renew the Foil & Cutter cassette and regularly oil the shaving system, especially when cleaning with water only.
  • Z
    zacharyfullerAug 25, 2025
    Why does my Braun 720s-7 Electric Shaver turn off with a fully charged battery?
    • H
      Heidi SimpsonAug 25, 2025
      If your Braun Electric Shaver turns off even with a fully charged battery, it's likely due to worn foil and cutter parts requiring more power than the motor can provide. Replacing the Foil & Cutter cassette should resolve this. Also, regularly oil the shaving system, especially after cleaning it with water only.
  • M
    Michelle BridgesAug 25, 2025
    What to do if cleaning doesn't start when pressing the start button on my Braun Electric Shaver?
    • C
      cruzrobertAug 26, 2025
      If cleaning doesn't initiate when you press the start button, ensure the shaver is correctly placed in the Clean&Renew station so that the contacts align. Also, verify that the cleaning cartridge has enough cleaning fluid (replace it if the display lights red). Finally, ensure the appliance is not in stand-by mode by pressing the start button again.
  • M
    Martin WhiteAug 26, 2025
    Why has my Braun Electric Shaver's shaving performance dropped significantly?
    • B
      Brandon PooleAug 27, 2025
      A significant drop in shaving performance of your Braun Electric Shaver can be due to several reasons: worn foil and cutter, a changed personal setting, or a clogged shaving system. To resolve this, renew the Foil & Cutter cassette. For a thorough and fast shave we recommend the green (intensive) setting. Also, soak the Foil & Cutter cassette into hot water with a drop of dish liquid, rinse it properly, tap it out, and apply a drop of light machine oil on the foil once dry.
  • C
    Caroline IrwinSep 22, 2025
    Why does my Braun 720s-7 have an unpleasant smell from the shaver head?
    • D
      Denise GarciaSep 22, 2025
      An unpleasant smell from your Braun Electric Shaver head can occur if it's cleaned with water improperly or if the cleaning cartridge has been in use for too long. When cleaning the shaver head with water, use only hot water and, occasionally, some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, change the cleaning cartridge at least every 8 weeks.
  • E
    Eric AllenSep 23, 2025
    What should I do if the replacement symbol lights up on my Braun 720s-7 after changing shaving parts?
    • J
      Jason GarrettSep 23, 2025
      If the replacement symbol lights up on your Braun Electric Shaver even after you've changed the shaving parts, it means the reset button hasn't been pushed. Push the reset button for at least 3 seconds to reset the counter.
  • J
    jrobinsonSep 9, 2025
    Why are battery segments skipped on my Braun 720s-7 display?
    • R
      Rachael JenkinsSep 10, 2025
      Skipped battery segments on your Braun Electric Shaver display, while the battery capacity is decreasing, can happen if: * The foil and cutter are worn, requiring more power for each shave. In this case, renew the foil & cutter cassette. * The shaving system needs regular oiling, especially after cleaning with water only.
  • K
    Kelly HillSep 12, 2025
    Why is there an increased consumption of cleaning fluid in my Braun Electric Shaver?
    • D
      Derrick DaughertySep 12, 2025
      Increased consumption of cleaning fluid in your Braun Electric Shaver may be caused by a clogged drain in the Clean&Renew station. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
  • C
    Christine GilmoreSep 3, 2025
    What to do if the replacement symbol lights up after changing shaving parts on my Braun 720s-7?
    • A
      andrew46Sep 3, 2025
      If you've recently changed the shaving parts on your Braun Electric Shaver but the replacement symbol is still lit, it likely means the reset button hasn't been pressed. Push the reset button for at least 3 seconds to reset the counter.
  • C
    Carolyn FoleySep 1, 2025
    What to do if shaving system is still wet after cleaning Program has been completed in Braun 720s-7?
    • L
      Lisa HarringtonSep 1, 2025
      If the shaving system of your Braun Electric Shaver remains wet after the cleaning program, it could be due to a clogged drain in the Clean&Renew station or an old cleaning cartridge. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean. If that doesn't work, the ethanol proportion has decreased while the oil proportion has increased in the cleaning cartridge. Remove residue with a cloth.

Braun 720s-7 Specifications

General IconGeneral
TypeElectric Shaver
SeriesSeries 7
Model720s-7
Shaver TypeFoil
Wet & Dry UseYes
Battery TypeLithium-ion
Charging Time1 hour
Usage Time50 minutes
Travel LockYes
Voltage AdaptationYes
Cordless UseYes
Corded UseYes
Cleaning StationNo
Shaving TechnologySonic Technology
DisplayLED
Quick Charge5 minutes
Weight0.5 kg

Related product manuals