Do you have a question about the Braun 7680 and is the answer not in the manual?
Shaver Type | Foil |
---|---|
Wet/Dry Use | Yes |
Charging Time | 1 hour |
Operating Time | 50 minutes |
Travel Lock | Yes |
Precision Trimmer | Yes |
Battery Level Indicator | Yes |
Cordless Use | Yes |
Model | 7680 |
Power Source | Rechargeable Battery |
Quick Charge | 5 minutes |
Cleaning System | Yes |
Display | Yes (LCD) |
Analyzes shaving patterns and beard type for optimal performance.
Advises against tampering with the low voltage adaptation system due to electric shock risk.
Details wattage, input voltage, and power supply specifications for the shaver.
Identifies and lists the main components of the Braun shaver.
Provides instructions for initial and subsequent charging, including optimal temperature.
Explains the countdown display for the initial 4-hour charging period.
Details the 5-minute step countdown display for subsequent charges.
Shows how the display indicates a fully charged battery status.
Explains display for less than 10 minutes of shaving time and low battery indication.
Describes SmartLogic's automatic monitoring and reconditioning of batteries.
How to use the info key to check shave duration or part numbers, and run a demo.
Explains the function of each switch position for operation and trimming.
Instructions for shaving using the power cord when the battery is discharged.
Provides advice for optimal shaving technique and results.
Refers to the Clean&Charge for automatic cleaning and lubrication needs.
Step-by-step instructions for manually cleaning the shaver components.
Guidance on when and how to replace the shaver foil and cutter block.
Information on purchasing spare parts like foil and cutter blocks.
Guidelines for environmentally sound disposal of the appliance's batteries.
Confirms the product meets EMC and Low Voltage Directives.
Key safety and operational recommendations for the Clean&Charge unit.
Identifies the main parts of the Clean&Charge cleaning station.
Instructions for mounting the optional wall holder for the unit.
Details power consumption, input voltage, and power supply for the unit.
Steps for the first use, including shaver charging and system setup.
Detailed steps for inserting the cleaning cartridge into the unit.
Guidance on removing the used cartridge and installing a new one.
How to choose between 'clean', 'charge', or combined modes.
Details the charging-only program duration for the Clean&Charge.
Notes that only the 'clean' function is available for corded shavers.
How to connect the shaver and initiate selected cleaning or charging programs.
Explains that the 'clean' function runs by default if no program is chosen.
Advises against interrupting programs and how to do so if necessary.
Explains flashing and solid 'cartridge' lights indicating fluid level and replacement.
Information on cartridge capacity, replacement frequency, and storage.
Advice on cleaning the exterior of the Clean&Charge unit.
States the 1-year guarantee period and what it covers.
Lists conditions and damages not covered by the guarantee.
Instructions for obtaining service and warranty claims.
Note specific to the UK concerning statutory consumer rights.