Braun 7760cc - User Manual

Questions and Answers

L
Lisa WilsonSep 1, 2025
What to do if shaving system is still wet after cleaning Program has been completed in Braun 7760cc?
- D
  Darren GambleSep 1, 2025
  If the shaving system of your Braun Electric Shaver remains wet after the cleaning program, it could be due to a clogged drain in the Clean&Renew station or an old cleaning cartridge. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean. If that doesn't work, the ethanol proportion has decreased while the oil proportion has increased in the cleaning cartridge. Remove residue with a cloth.
P
patrick91Aug 31, 2025
What to do if battery performance dropped significantly in my Braun 7760cc Electric Shaver?
- J
  Jacob ByrdAug 31, 2025
  If you notice a significant drop in your Braun Electric Shaver's battery performance, it could be due to worn foil and cutter requiring more power, or the shaver head being regularly cleaned with water but not lubricated. Consider replacing the Foil & Cutter cassette. If you regularly clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
D
Daniel JohnsonAug 30, 2025
Why is there increased consumption of cleaning fluid in my Braun Electric Shaver?
- T
  Thomas GarciaAug 30, 2025
  Increased consumption of cleaning fluid is often due to a clogged drain in the Clean&Renew station. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
A
Ashley ColonAug 29, 2025
Why is the shaver head of my Braun Electric Shaver damp?
- E
  Elizabeth HawkinsAug 29, 2025
  A damp shaver head may occur if the drying time after automatic cleaning was too short (clean directly after shaving to allow enough time for drying). Also, the drain of the Clean&Renew station may be clogged (clean the drain with a wooden toothpick and regularly wipe the tub clean). The cleaning cartridge might have been used for a while (remove residue with a cloth, since the ethanol/isopropanol proportion has decreased while the oil proportion has increased).
J
Jennifer DeleonAug 28, 2025
How to get rid of the unpleasant smell from Braun 7760cc Electric Shaver head?
- K
  Katelyn WilsonAug 28, 2025
  An unpleasant smell may arise if the shaver head is cleaned with water (use only hot water and, occasionally, liquid soap without abrasive substances; remove the Foil & Cutter cassette to let it dry). Also, replace the cleaning cartridge at least every 8 weeks.
C
Catherine MeadowsAug 27, 2025
What to do if shaving performance dropped significantly on my Braun Electric Shaver?
- R
  rodney59Aug 27, 2025
  A significant drop in shaving performance with your Braun Electric Shaver can be caused by several factors. First, the foil and cutter may be worn and need replacement. Second, check if the personal setting for shaving performance has been changed. For a thorough and fast shave, the green (intensive) setting is recommended. Third, the shaving system might be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly, tap it out, and apply a drop of light machine oil once it's dry.
K
kimberly33Aug 26, 2025
Why has my Braun Electric Shaver's shaving performance dropped significantly?
- C
  Christopher FletcherAug 27, 2025
  A significant drop in shaving performance of your Braun Electric Shaver can be due to several reasons: worn foil and cutter, a changed personal setting, or a clogged shaving system. To resolve this, renew the Foil & Cutter cassette. For a thorough and fast shave we recommend the green (intensive) setting. Also, soak the Foil & Cutter cassette into hot water with a drop of dish liquid, rinse it properly, tap it out, and apply a drop of light machine oil on the foil once dry.
O
olaraAug 25, 2025
What to do if cleaning doesn't start when pressing the start button on my Braun 7760cc?
- W
  Willie PooleAug 26, 2025
  If cleaning doesn't initiate when you press the start button, ensure the shaver is correctly placed in the Clean&Renew station so that the contacts align. Also, verify that the cleaning cartridge has enough cleaning fluid (replace it if the display lights red). Finally, ensure the appliance is not in stand-by mode by pressing the start button again.
D
duarteandrewAug 25, 2025
Why does my Braun 7760cc Electric Shaver turn off with a fully charged battery?
- U
  ugriffinAug 25, 2025
  If your Braun Electric Shaver turns off even with a fully charged battery, it's likely due to worn foil and cutter parts requiring more power than the motor can provide. Replacing the Foil & Cutter cassette should resolve this. Also, regularly oil the shaving system, especially after cleaning it with water only.

Braun 7760cc Specifications

General

Type	Electric Shaver
Model	7760cc
Series	Series 7
Cleaning System	Yes
Battery Type	Lithium-ion
Run Time	50 minutes
Charge Time	1 hour
Quick Charge	Yes
Wet & Dry Use	Yes
Cleaning Station	Yes
Quick Charge for 1 shave	5 minutes
Precision Trimmer	Yes
Travel Lock	Yes
Display	LED Display
Shaver Type	Foil Shaver
Power Source	Battery / Mains