Braun BNT 400 - Changing the temperature scale; Changing the sound mode; Calibration

12
Changing the temperature scale
1
Open battery compartment and remove the
batteries.
2
°C / °F switch is accessible in the battery
compartment.
3
Slide switch to °C or °F to set preferred
temperature scale.
4
Replace the batteries and close the
battery door.
Changing the sound mode
The No touch + forehead thermometer allows you
to silence the beeps on the thermometer to avoid
waking a sleeping child. To activate the silence
feature, slide the switch to the silent mode position
and take a temperature reading. An icon will
appear on the screen to indicate that the
thermometer is in silent mode.
Calibration
The thermometer is initially calibrated at the time of manufacture. If this thermometer
is used according to the use instructions, periodic re-adjustment is not required. If at
any time you question the accuracy, please contact customer service.
The LOT and SN of your device are located inside the battery compartment.
Manufacturing date is given by the LOT number. The first three (3) digits represent
the Julian date that the product was manufactured and the next two (2) digits
represent the last two numbers of the calendar year the product was manufactured.
The last identifiers are the letters that represent the manufacturer.
An example: LOT 11614tav, this product has been manufactured on the 116th day
of the year 2014.
Celsius Fahrenheit