14
Care and cleaning
Use an alcohol swab or cotton swab moistened with alcohol (70% isopropyl) to
clean the thermometer casing and the measuring probe. Ensure that no liquid
enters the interior of the thermometer. Never use abrasive cleaning agents,
thinners or benzene for cleaning and never immerse the instrument in water or
other cleaning liquids. Wait 10 minutes after cleaning before taking a
temperature measurement.
Make sure to replace the protective cap after use to prevent scratches or
damage from occurring to the thermometer.
Never insert a sharp object into the scanner area or any other open surface on
the thermometer.
Replacing the batteries
The No touch + forehead thermometer comes with 2 AAA batteries. Replace
with 2 new AAA batteries when the flashing battery symbol appears on the LCD
screen. To change the batteries, slide open the battery cover and remove
batteries. Replace the batteries being sure to align properly as indicated inside
the battery compartment. Remove the battery from the product if it is not
required for extended periods of time in order to avoid damage to the
thermometer resulting from a leaking battery.
To protect the environment, dispose of empty batteries at appropriate
collection sites according to national or local regulations.
Limited warranty
This product comes with limited warranty commencing on the date of purchase
(See warranty card for details). Within the warranty period we will eliminate, free
of charge, any defects in the appliance resulting from faults in materials or
workmanship, by replacing the complete appliance.
This warranty is applicable only for the appliance supplied by the appointed
distributor. This warranty does not cover: damage due to improper use, normal
wear or use as well as defects that have a negligible effect on the value or
operation of the appliance. The warranty becomes void if repairs are undertaken
by unauthorized persons and if original Braun parts are not used.
To Next Page
Loading...
