16
ASTM E1965-98:2016 - Standard Specification for Infrared Thermometers for
Intermittent Determination of Patient Temperature.
ISO 80601-2-56:2017 Particular requirements for basic safety and essential
performance of clinical thermometers for body temperature measurement.
IEC 60601-1-2:2014 Medical electrical equipment – Part 1-2: General
requirements for basic safety and essential performance – Collateral Standard:
Electromagnetic disturbances – Requirement and tests.
NOTE: Do not use this device in the presence of electromagnetic or other
interference outside the normal range specified in IEC 60601-1-2:2014.
EN 1041: 2008 Information supplied by the manufacturer of medical devices.
IEC 60601-1-11:2015 Medical electrical equipment – Part 1-11: General
requirements for basic safety and essential performance – Collateral standard:
Requirements for medical electrical equipment and medical electrical systems
used in the home healthcare environment.
15 °C
40 °C
-25 °C
55 °C
Internally Powered Equipment
Continuous Operation
IP22: Protected against solid foreign objects of 12.5 mm diameter and greater.
Protected against vertically falling water drops when the device is tilted up to
15 degrees.
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.
For detailed description of EMC requirements please contact consumer service.
Portable and mobile RF communications equipment can affect MEDICAL
ELECTRICAL EQUIPMENT.
Remove the battery from the instrument if it is not required for extended periods of
time in order to avoid damage to the thermometer resulting from a leaking battery.
Please do not dispose of the product in the household waste at the end of
its useful life.
To protect the environment, dispose of empty batteries at appropriate
collection sites according to national or local regulations.
To Next Page
Loading...
