Braun FP3020 - Slicing, Shredding, and Grating

Insert Speed Processing Examples
11. a - Fine
Slicing
1-2 Cucumbers, Cabbage, Raw
Potatoes, Carrots, Onions,
Radishes
12. b - Coarse
Slicing (Optional)
1-2 Cucumbers, Kohlrabi, Raw
Potatoes, Onions, Banan-
as, Tomatoes, Mushrooms,
Celery
13. c - Fine
Shredding
3-6 Cheese (so to medium),
Cucumbers, Carrots, Raw
Potatoes, Apples
14. d- Coarse
Shredding
3-6 Cheese (so to medium),
Cucumbers, Kohlrabi, Beet-
root, Carrots, Raw Potatoes,
Apples, Cabbage
15. e - Grating 8-15 Raw Potatoes, Horseradish,
Parmigiano Cheese (hard)
SLICING, SHREDDING, GRATING
pg 10
1. Place the insert you want to use
into the insert carrier and snap into
position (see gure C). In order to
remove the insert, push up the insert
end that protrudes at the bottom of
the insert carrier.
2. Press the assembled slicer/shredder
onto the drive sha of the food
processor bowl (see gure D).
3. Put the lid onto the bowl and lock
into place. Set the speed and ll the
food to be processed into the lling
tube while the motor is switched o.
Relling should be done with the
motor switched o.
C
a
D