42
• Navigate through the list with t and select in alphabetical order (all drugs)
or within a category with
l. The drug selected in the second pump must be
the same as the first.
•
Navigate through the list with t and select a concentration with l. The
concentration in the second pump must be the same as the first.
•
Confirm ‘Use Take Over Mode’ with u.
•
Check IV line of is connected to the patient and that stopcocks are
open.
Symbols:
first Perfusor® Space pump
second Perfusor® Space pump
Deactivation:
•
Press the c button on the pump.
Take Over Phase:
When the syringe is nearly empty, a pre-alarm will sound on the
pump.
When the syringe is empty, the pump will automatically start
infusing at the correct rate.
SPECIAL FUNCTIONS
Chapter 3
To Next Page
Loading...