To Next PageTo Next PageWhy does my Braun Electric Shaver turn off with a fully charged battery?
If your Braun Electric Shaver turns off even with a fully charged battery, it's likely due to worn foil and cutter parts requiring more power than the motor can provide. Replacing the Foil & Cutter cassette should resolve this. Also, regularly oil the shaving system, especially after cleaning it with water only.
Why has my Braun Series 7 Electric Shaver battery performance dropped significantly?
If the battery performance of your Braun Electric Shaver has significantly dropped, it could be because the foil and cutter are worn, requiring more power for each shave. Consider renewing the Foil & Cutter cassette. Also, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week.
What to do if shaving performance dropped significantly on my Braun Electric Shaver?
A significant drop in shaving performance with your Braun Electric Shaver can be caused by several factors. First, the foil and cutter may be worn and need replacement. Second, check if the personal setting for shaving performance has been changed. For a thorough and fast shave, the green (intensive) setting is recommended. Third, the shaving system might be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly, tap it out, and apply a drop of light machine oil once it's dry.
Why are battery segments skipped on my Braun Series 7?
If the battery segments in the display of your Braun Electric Shaver are skipped as the battery capacity decreases, it usually means the foil and cutter are worn, requiring more power for each shave. You should replace the Foil & Cutter cassette. Regularly oiling the shaving system, especially after cleaning with water only, can also help.
Why has the battery performance of my Braun Electric Shaver dropped significantly?
A significant drop in battery performance in your Braun Electric Shaver can occur for two main reasons. First, the foil and cutter may be worn, requiring more power for each shave. Second, if you regularly clean the shaver head with water but don't lubricate it. To fix this, renew the Foil & Cutter cassette. If you regularly clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if replacement symbol lights up after changing shaving parts on my Braun Series 7?
If the replacement symbol lights up on your Braun Electric Shaver after you've recently changed the shaving parts, it means the reset button hasn't been pushed. Push the reset button for at least 3 seconds to reset the counter.
Why does my Braun Electric Shaver have an unpleasant smell?
An unpleasant smell from the shaver head of your Braun Electric Shaver is caused by cleaning the shaver head with water. When cleaning the shaver head with water, use only hot water and, occasionally, some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry.
Why has my Braun Electric Shaver shaving performance dropped significantly?
If your Braun Electric Shaver's shaving performance has dropped significantly, it could be due to several reasons. First, the foil and cutter may be worn and need replacement. Second, check if the personal setting of shaving performance has been changed; for a thorough and fast shave, the green (intensive) setting is recommended. Third, the shaving system might be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly, tap it out, and apply a drop of light machine oil once dry.
What to do if my Braun Series 7 turns off with fully charged battery?
If your Braun Electric Shaver turns off even with a fully charged battery, it's likely because the foil and cutter are worn, requiring more power than the motor can provide. Replace the Foil & Cutter cassette. Also, regularly oil the shaving system, especially if you clean it with water only.
Why are battery segments in the display skipped on my Braun Series 7 Electric Shaver?
If the battery segments in the display of your Braun Electric Shaver are skipped with decreasing battery capacity, it's likely because the foil and cutter are worn, requiring more power for each shave. To resolve this, renew the Foil & Cutter cassette and regularly oil the shaving system, especially when cleaning with water only.
General| Charging Time | 1 hour |
|---|---|
| Running Time | 50 minutes |
| Wet & Dry | Yes |
| Voltage Adaptation | 100-240V |
| Precision Trimmer | Yes |
| Travel Lock | Yes |
| Battery Type | Lithium-ion |
| Quick Charge | 5 minutes for 1 shave |
| Display | Yes |
| Cleaning | Yes (with cleaning station) |
Highlights critical risks related to electric shock and water immersion.
Instructions on operating the shaver, adjusting the head, and using the trimmer.
Three simple steps recommended by Braun for optimal dry shaving results.
Adjusting shaving power sensitivity from sensitive to intensive settings.
Procedure for cleaning the shaver head with water and soap.
Guide for replacing shaver parts and resetting the maintenance indicator.
Information on available replacement parts and accessories.
Instructions for safely removing the rechargeable battery for disposal.
Methods for carrying or shipping the product to an authorized service center.
Contacting Braun for replacement parts and accessories.
Contacting Braun for direct assistance from a service representative.
Details of the two-year limited warranty for Braun shavers sold in Canada.
