Braun 799cc-7 - User Manual

Other manuals for Braun 799cc-7

Questions and Answers:

G
george87Sep 12, 2025
Why has my Braun 799cc-7 Electric Shaver shaving performance dropped significantly?
- G
  gordonrodneySep 12, 2025
  A drop in shaving performance in your Braun Electric Shaver can occur for several reasons: * The foil and cutter may be worn, requiring replacement. * Your personal shaving performance setting may have been changed; the green (intensive) setting is recommended for a thorough and fast shave. * The shaving system might be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, rinse it thoroughly, tap it out, and apply a drop of light machine oil once dry.
M
Mrs. Crystal BrownAug 22, 2025
What to do if cleaning does not start when pressing the start button on my Braun 799cc-7?
- Z
  Zachary NelsonAug 22, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver, consider these possibilities: * The shaver might not be properly placed in the Clean&Renew station. Ensure the shaver's contacts align with the station's contacts. * The cleaning cartridge may not contain enough cleaning fluid. If the display lights red, insert a new cleaning cartridge. * The appliance could be in stand-by mode. Press the start button again.
T
Traci WilliamsAug 25, 2025
What to do if cleaning doesn't start on my Braun 799cc-7?
- L
  Lauren LeeAug 25, 2025
  If your Braun Electric Shaver cleaning does not start when you press the start button, there are a few possible reasons. First, the shaver might not be placed properly in the Clean&Renew station; ensure the contacts of the shaver align with the contacts in the station. Second, the cleaning cartridge may not contain enough cleaning fluid, indicated by a red light on the display; insert a new cleaning cartridge. Third, the appliance might be in standby mode; press the start button again.
G
graceevansAug 26, 2025
Why is my Braun Electric Shaver head damp?
- K
  Kelly AndersonAug 26, 2025
  If your Braun Electric Shaver head is damp, it could be due to a few reasons. The drying time after automatic cleaning might have been too short, so clean directly after shaving to allow enough time for drying. The drain of the Clean&Renew station could be clogged, so clean the drain with a wooden toothpick and regularly wipe the tub clean. Alternatively, the cleaning cartridge might have been used for quite a while, decreasing the ethanol/isopropanol proportion while increasing the oil proportion; remove residue with a cloth.
J
Jared GilesAug 27, 2025
What to do if my Braun 799cc-7 Electric Shaver head is damp?
- J
  James WestAug 28, 2025
  A damp shaver head on your Braun Electric Shaver can occur for a few reasons: * Insufficient drying time after automatic cleaning. Try cleaning directly after shaving to allow more drying time. * A clogged Clean&Renew station drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean. * Prolonged use of the cleaning cartridge. The ethanol/isopropanol proportion decreases while the oil proportion increases. Remove residue with a cloth.
S
Samantha IbarraAug 29, 2025
Why is my Braun 799cc-7 Electric Shaver cleaning fluid consumption increased?
- T
  tstewartAug 29, 2025
  Increased cleaning fluid consumption in your Braun Electric Shaver's Clean&Renew station is often due to a clogged drain. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean.
D
Denise ReynoldsSep 18, 2025
Why does my Braun 799cc-7 head have an unpleasant smell?
- E
  Elizabeth SandovalSep 18, 2025
  An unpleasant smell from your Braun Electric Shaver head may be caused by: * Cleaning the shaver head with water. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. * The cleaning cartridge has been in use for more than 8 weeks.
D
Denise WhiteSep 12, 2025
What to do if my Braun 799cc-7 turns off with a fully charged battery?
- J
  John PerezSep 13, 2025
  If your Braun Electric Shaver turns off even with a fully charged battery, it could be due to worn foil and cutter, requiring more power than the motor can provide. Replacing the Foil & Cutter cassette may resolve this. Also, regularly oil the shaving system, especially after cleaning with water.
C
Christopher FitzgeraldSep 9, 2025
Why is my Braun 799cc-7 Electric Shaver consuming cleaning fluid so fast?
- J
  Jade CharlesSep 9, 2025
  Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean&Renew station is often due to a clogged drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean to resolve this issue.
M
mpetersSep 5, 2025
What to do if replacement symbol lights up after changing shaving parts on Braun 799cc-7 Electric Shaver?
- C
  Chris EvansSep 5, 2025
  If the replacement symbol lights up on your Braun Electric Shaver even after changing the shaving parts, it means the reset button hasn't been pushed. Push the reset button for at least 3 seconds to reset the counter.

Braun 799cc-7 Specifications

General

Type	Electric Shaver
Model	799cc-7
Series	Series 7
Number of shaving elements	4
Battery Life	Up to 50 minutes
Operating Time	50 minutes
Charge Time	1 hour
Quick Charge	Yes
Wet & Dry Use	Yes
Wet & Dry	Yes
Color	Silver
Travel Lock	Yes
Precision Trimmer	Yes
Travel Case	Yes
Shaver Type	Foil
Cleaning System	Yes
Shaving Technology	Sonic Technology
Battery Type	Li-Ion
Quick Charge for 1 shave	5 minutes
Display	LED
Power Source	Cordless