EasyManua.ls Logo

Braun 799cc-7 - User Manual

Braun 799cc-7
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.braun.com
Series 7
Type 5696
Modèle 5696
Modelo 5696
trimmer
trimmer
trimmer
Series 7Series 7
Series 7
799cc-6
Wet & Dry
Peau sèche et
mouillée
wet & dry
96183057_799cc-6_NA_S1.indd 196183057_799cc-6_NA_S1.indd 1 07.11.12 13:2107.11.12 13:21
Stapled booklet, 110 x 200 mm, 42 p (incl. 6 p cover), 2/2c = HKS43N + black

Other manuals for Braun 799cc-7

Questions and Answers

  • E
    Evan MilesSep 2, 2025
    Why has my Braun 799cc-7 Electric Shaver shaving performance dropped?
    • M
      Marcus CarterSep 2, 2025
      If the shaving performance of your Braun Electric Shaver has significantly decreased, several factors could be responsible. First, the foil and cutter may be worn and need replacement. Second, the personal setting for shaving performance might have been changed. For a thorough and fast shave, the green (intensive) setting is recommended. Third, the shaving system could be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly, tap it out, and apply a drop of light machine oil once it's dry.
  • K
    Kenneth Richards MDAug 31, 2025
    Why are battery segments skipped on my Braun 799cc-7?
    • G
      Grace MosleyAug 31, 2025
      If the battery segments in the display of your Braun Electric Shaver are skipped as the battery capacity decreases, it's usually because the foil and cutter are worn, which increases the power needed for each shave. Replace the Foil & Cutter cassette and regularly oil the shaving system, especially if you clean it with water.
  • S
    Samantha IbarraAug 29, 2025
    Why is my Braun 799cc-7 Electric Shaver cleaning fluid consumption increased?
    • T
      tstewartAug 29, 2025
      Increased cleaning fluid consumption in your Braun Electric Shaver's Clean&Renew station is often due to a clogged drain. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean.
  • J
    Jared GilesAug 27, 2025
    What to do if my Braun 799cc-7 Electric Shaver head is damp?
    • J
      James WestAug 28, 2025
      A damp shaver head on your Braun Electric Shaver can occur for a few reasons: * Insufficient drying time after automatic cleaning. Try cleaning directly after shaving to allow more drying time. * A clogged Clean&Renew station drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean. * Prolonged use of the cleaning cartridge. The ethanol/isopropanol proportion decreases while the oil proportion increases. Remove residue with a cloth.
  • G
    graceevansAug 26, 2025
    Why is my Braun Electric Shaver head damp?
    • K
      Kelly AndersonAug 26, 2025
      If your Braun Electric Shaver head is damp, it could be due to a few reasons. The drying time after automatic cleaning might have been too short, so clean directly after shaving to allow enough time for drying. The drain of the Clean&Renew station could be clogged, so clean the drain with a wooden toothpick and regularly wipe the tub clean. Alternatively, the cleaning cartridge might have been used for quite a while, decreasing the ethanol/isopropanol proportion while increasing the oil proportion; remove residue with a cloth.
  • T
    Traci WilliamsAug 25, 2025
    What to do if cleaning doesn't start on my Braun 799cc-7?
    • L
      Lauren LeeAug 25, 2025
      If your Braun Electric Shaver cleaning does not start when you press the start button, there are a few possible reasons. First, the shaver might not be placed properly in the Clean&Renew station; ensure the contacts of the shaver align with the contacts in the station. Second, the cleaning cartridge may not contain enough cleaning fluid, indicated by a red light on the display; insert a new cleaning cartridge. Third, the appliance might be in standby mode; press the start button again.
  • M
    Mrs. Crystal BrownAug 22, 2025
    What to do if cleaning does not start when pressing the start button on my Braun 799cc-7?
    • Z
      Zachary NelsonAug 22, 2025
      If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver, consider these possibilities: * The shaver might not be properly placed in the Clean&Renew station. Ensure the shaver's contacts align with the station's contacts. * The cleaning cartridge may not contain enough cleaning fluid. If the display lights red, insert a new cleaning cartridge. * The appliance could be in stand-by mode. Press the start button again.

Braun 799cc-7 Specifications

General IconGeneral
TypeElectric Shaver
Model799cc-7
SeriesSeries 7
Number of shaving elements4
Battery LifeUp to 50 minutes
Operating Time50 minutes
Charge Time1 hour
Quick ChargeYes
Wet & Dry UseYes
Wet & DryYes
ColorSilver
Travel LockYes
Precision TrimmerYes
Travel CaseYes
Shaver TypeFoil
Cleaning SystemYes
Shaving TechnologySonic Technology
Battery TypeLi-Ion
Quick Charge for 1 shave5 minutes
DisplayLED
Power SourceCordless

Related product manuals