Page 28
Lift Operating Instructions
1. Stand Clear and press the
UP switch until the platform
stops (extends fully). Release
Switch.
2. Lift handrail latch handles,
deploy handrails up to vertical
position and lower latch handles
fully (Photo B). See Handrail
Operating Instructions.
3. Lift outer barrier to vertical posi-
tion. See Handrail Operating
Instructions.
4. Latch the handrail belt.
5. Press the UP switch until the
platform stops (just below the
door opening). Release switch.
A
C
OPEN - DOOR - CLOSE
Inner Roll Stop
Lift stops just below door.
D
B
TO DEPLOY PLATFORM:
To Next Page
Loading...
