Page 32
Lift Operating Instructions
2. Press the UP switch to fold
both outer barriers up fully
(vertical) and raise the platform
until the platform stops.
Release switch.
Note: Platform will stop just
below the door opening.
3. Open bus door fully.
4. Press the UP switch until the
platform stops (raises to floor
level) and the inner roll stop un-
folds fully to floor level position.
Release switch.
See Photo R.
5. Unlock wheelchair brakes and
unload passenger from plat-
form.
T
S
Inner Roll Stop at Floor Level
R
Q
TO LOAD PASSENGER (continued):
To Next Page
Loading...
Need help?
General
