3
ENG
TURN ON & BLUETOOTH PAIRING
1. Press the Power button for 2-3
seconds to turn on your BRAVEN.
Press the same button again for
2-3 seconds to turn your BRAVEN
off.
2. Activate Bluetooth
®
on the phone
or device you are pairing with (see
your device’s instruction manual
for information on activating its
Bluetooth
®
settings).
3. Press and hold the Play Button on
your BRAVEN until you hear the
BRAVEN pairing sound.
4. Go to your phone or device’s
Bluetooth
®
settings and select
“BRAVEN 850” or “BRAVEN
855s” from the list.
5. If asked for a passcode enter “0000”
Your BRAVEN will remember the last 8 devices it has
paired with.
NOTE: If your BRAVEN does not have an active
Bluetooth
®
connection and is left on, it will
shut itself o after 90 minutes. To restart your
BRAVEN you will need to press and hold the
power button for 2-3 seconds.
To Next Page
Loading...
