ENGLISH | 4
CHARGING YOUR BRAVEN
CHARGING EXTERNAL DEVICES
Before using your BRAVEN READY PRIME
™
for the first time, fully charge your speaker until the battery indicator
light stays solid white.
Charge your BRAVEN READY PRIME
™
by inserting the power adapter into a wall outlet. Next, plug the cable into
the charging port on the back of the READY PRIME
™
.
MONITORING BATTERY LEVEL: Use the Battery Status LED to monitor your speaker’s battery level.
Red = 40% or lower, Yellow = 40% - 70%, Green = 70% - 100%.
Your BRAVEN can charge most USB enabled smartphones and tablets using the 0.3A-2.4A full-sized, USB Port.
To use external charging:
1. Turn your BRAVEN on.
2. Plug your USB power cable into the USB port on the back of your BRAVEN.
3. Insert the other end of the cable into your device to immediately begin charging.
SPEAKERPHONE
Press the Mic button on your BRAVEN to answer and end calls over the speakerphone.
WATERPROOF FEATURES
The BRAVEN READY PRIME
™
is IP68 waterproof certified, designed to withstand rainfall, waterjets, splashing or a
dunk in up to 3ft / 1m of water for up to 30 minutes.
IMPORTANT: Ensure your BRAVEN READY PRIME
™
is prepared for use in a wet environment by removing all cable
connections and tightly sealing the port cover. If the cover is not securely fastened, your BRAVEN may sustain
water damage.
To Next Page
