What to do if the BRAVILOR BONAMAT SPRSO says to empty waste bin?
If the waste bin counter has been exceeded, remove the drip tray, empty the waste bin (including the drip tray), put the parts back in the correct position, and confirm the operation on the screen.
What to do if BRAVILOR BONAMAT Coffee Maker asks to fill or place the water tank?
This message appears when no water is detected in the water tank, the water tank is not present, or the float is not in the upper position. Here are possible solutions: * Fill the water tank and place it in the correct position. * Ensure the water tank is present and correctly positioned. * If the float is not in the upper position, the issue might be due to pollution, a leak, or poor conductivity. Try cleaning the float. If the float has a leak, replace it. If the issue is with the I/O board, replace the I/O board.
What to do if BRAVILOR BONAMAT Coffee Maker says to place drip tray + waste bin?
This message appears when the waste bin is not in place or the waste bin switch is not activated. Ensure the drip tray with waste bin is placed in the correct position. If the waste bin switch is not activated, it may need to be replaced. In some cases, the I/O board may be the cause, requiring its replacement.
Why does my BRAVILOR BONAMAT Coffee Maker say to close the side panel?
This message appears because the side/service panel is not in the correct position or the panel switch is not activated. Ensure the side/service panel is closed correctly. If the panel switch is not activated, it may need to be replaced. In some cases, the I/O board may be the cause, requiring its replacement.
General| Brand | BRAVILOR BONAMAT |
|---|---|
| Model | SPRSO |
| Category | Coffee Maker |
| Language | English |
Lists and illustrates the main components of the Sprso machine.
Describes optional components like the milk unit and water filter.
Explains the function and benefits of connecting a milk unit.
Details the purpose and benefits of using a water filter.
Explains the function of the machine's navigation and operation buttons.
Guides unpacking, inspection, and initial machine setup procedures.
Describes the automatic flushing process upon switching on the Sprso.
Explains how to manually put the machine into standby and reactivate it.
Details how to select and start beverage preparation, including status indicators.
Explains how to adjust beverage size, strength, and intensity settings.
Explains how to manually adjust the height of the beverage outlet.
Details the daily cleaning tasks for specific parts of the machine.
Explains how to clean the drip tray and waste bin when prompted.
Outlines the weekly manual cleaning tasks for various machine components.
Provides step-by-step instructions for cleaning the beverage outlet.
Explains how to clean the water tank and replace the water filter.
Details the manual cleaning process for the CIRCO brewer unit.
Explains how to clean the exterior housing of the Sprso machine.
Overview of the maintenance menu and its sub-functions like cleaning and descaling.
Describes the procedure for flushing the CIRCO brewer and coffee outlet.
Details the daily cleaning procedure for the milk system, including necessary items.
Explains the procedure for cleaning the CIRCO brewing unit and coffee spout.
Describes the quick cleaning procedure to rinse the milk outlet with hot water.
Explains the descaling process to remove lime scale deposits and prolong machine life.
Explains how to install, replace, or remove the water filter and update the counter.
Guides on how to reposition the CIRCO brewer axis if it's not in the correct position.
Explains how the machine tracks beverage preparation counts.
Details how to view logged errors for technical support purposes.
Guides on creating and saving custom beverages with personalized settings.
Explains the different beverage profiles and their characteristics.
Details how to activate and manage the milk unit for milk-based beverages.
Explains how to adjust the brew temperature for all beverages.
Describes how altitude setting affects brew temperature and boiling point.
Explains how to set the automatic energy-saving mode.
Details how to activate and deactivate the child lock feature for safety.
Explains how to adjust the brightness of the machine's display screen.
Describes the audio feedback signals and their adjustability.
Lists available languages and how to select them for the interface.
Explains how to change units for volume and height measurements.
Explains the importance of setting water hardness for descaling signals.
Details how to reset beverage, machine, or all settings to factory defaults.
Provides information on checking serial numbers and software versions.
Explains how to access online information, manuals, and animations via QR codes.
Guides on resolving issues when the CIRCO brewer housing is not positioned correctly.
Explains how to handle a blocked or defective CIRCO brewer.
Details specific warning codes, descriptions, and reset conditions.
Lists and explains error codes, their descriptions, and how to resolve them.
Describes common issues not covered by standard error/warning messages.
Provides data on water hardness levels and related filter lifespan.
Lists beverage volumes for different sizes (S, M, L) across various profiles.
Step-by-step guide for installing an internal water filter into the machine.
Explains how to adjust the coffee grinder for different coffee strengths and creami-ness.
Provides instructions for connecting and installing a milk unit to the Sprso.
Guides on connecting the Sprso to a fixed water supply.
Explains the message for an full waste bin and how to handle it.
Describes special features like standby mode and child lock activation via key combinations.
To Next Page
