6
Tuner Operation USB/SD/MMC/MP3 Playback
1. Load SD/MMC Card
Insert the SD/MMC card into the slot, with the
front side at top.
The unit will show CARD, and read the card
automatically.
2. Take out SD/MMC Card
Press SRC button and switch to non CARD
mode, take out the card.
3. Load USB Equipment
Insert the USB into the connector and the unit
will read the USB storer automatically.
4. Take out USB Equipment
Press SRC button and switch to non USB
mode, then take off the USB stick.
Band
During radio play, press the [BAND/PLAY]
button to choose between three FM and two
AM bands.
Up Tuning
Press the seek up [ ] button to tune stations
upward step-by-step. The current frequency
will be shown in digital format on the display
panel.
Press and hold the seek [ ] button to the
next available station.
Down Tuning
Press the seek down [ ] button to tune
stations downward step-by-step.
Press and hold the seek down [
] button to
the previous available station.
Manual store
When one expected radio station has been
detected, press and hold the [BAND] button,
then press the [FL-] or [FL+] button to select a
preset position, press the knob to conrm.
The unit can store 6 stations in each band.
Auto Store
Press the [AMS/INT] button to scan preset
stations 1-6. Hold it to automatically select six
strong stations and store them in the current
band. The new stations replace stations
already stored in that band.
Recall the stored stations
To recall the preset station, press [FL-] or [FL+]
repeatedly.
USB/SD/MMC Notes
USB functions (ash memory type) MP3 music
play
1. SD/MMC card support
2. USB flash memory 2 in 1 (SD/MMC)
support
3. FAT 12/FAT 16, FAT 32 is possible
4. Tag (id3 tag ver 2.0)
- Title/artist/album: 32 byte support
5. Multi card reader not support
6. USB 1.1 support
USB 2.0 support
(It can not support USB 2.0 speed. Just, get
the same speed with USB 1.1)
Note:
Not all USB devices are compatible with the
unit.
To Next Page
Loading...