Need help?Do you have a question about the BRC Sequent 24 and is the answer not in the manual?
General| Brand | BRC |
|---|---|
| Model | Sequent 24 |
| Category | Power Tool |
| Language | English |
Overview of the BRC sequential injection system, highlighting ease of installation and low cost.
Comparative analysis of key features and technical changes from prior Sequent system versions.
Details the operational unit controlling the system, focusing on its compact design and automotive standards compliance.
Explains the two-position switch for petrol-gas changeover and status visualization, including error reporting.
Introduces the pressure reducer, water temperature sensor, and gas pressure/temperature sensor.
Describes the resistive sensor fitted on the reducer, crucial for gas changing over strategies.
Identifies the component bearing injectors, integrating gas pressure and temperature sensors.
Specifies that the system exclusively uses BRC injectors and refers to power ratings.
Identifies the MAP sensor as identical to Standard SEQUENT, used exclusively during self-mapping.
Describes the harness, noting its slender design, 24-pole connector, and waterproof connectors.
Explains the novel positive-wire cutting method for injectors, simplifying wiring and reducing ECU wire entry.
Lists the .S19 and .FSL file types used for programming the ECU, with FSL containing operational information.
Outlines the steps for the assisted programming procedure, requiring the engine to be switched on.
Discusses the changing over operation, highlighting differences from previous systems due to injector cut methods.
Details changing over conditions based on engine water temperature and time since starting, with examples.
Introduces self-mapping as a tune-up function, similar to assisted programming, noting map selection.
Explains the self-mapping procedure, its similarity to assisted programming, and map selection options.
Allows checking software version updates available for download to the ECU, displaying software name and version.
Displays the software name and version information, specifically for the BRC SEQUENT 24 system.
To Next Page