Need help?Do you have a question about the Breas Vivo 45 and is the answer not in the manual?
General| Device Type | Ventilator |
|---|---|
| Operating Modes | CPAP |
| Target patient | Adults and pediatric patients |
| Humidifier | Optional |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Compliance | ISO 80601-2-12 |
| Tidal Volume Range | 50 - 2500 ml |
Defines the Vivo 45 as a pressure ventilator for mechanical ventilation.
Specifies the intended use of the Vivo 45 for adult/paediatric patients.
Lists conditions where the Vivo 45 is contraindicated or requires caution.
Describes the qualifications and roles of intended users like specialists and lay operators.
Lists general warnings and precautions for users to ensure safe operation.
Details warnings and precautions regarding electrical safety to prevent hazards.
Lists warnings and precautions related to environmental factors affecting device performance.
Provides warnings and guidance on the correct and safe use of patient circuits.
Offers warnings and precautions regarding the use and replacement of air filters.
Provides important warnings and precautions related to the humidifier function.
Outlines critical warnings and precautions for cleaning and maintaining the device.
Describes the main components and parts of the Vivo 45 medical equipment.
Identifies and explains the components and controls on the front panel of the Vivo 45.
Illustrates and describes the components visible on the side views of the Vivo 45.
Provides step-by-step instructions for removing and reattaching the device's side panels.
Identifies and explains the various ports, connectors, and symbols on the Vivo 45.
Details the initial steps for checking components and the device condition before use.
Provides instructions and warnings on how to correctly position the Vivo 45 for safe operation.
Offers a step-by-step guide for safely connecting the Vivo 45 to the mains power supply.
Provides instructions for correctly connecting the patient circuit to the ventilator.
Outlines the essential procedures for inspecting the device, cables, and performing startup checks.
Guides users on adjusting patient settings for optimal breathing comfort and therapy effectiveness.
Explains the purpose, importance, and procedure for performing the pre-use test.
Provides instructions for powering the Vivo 45 on, off, and entering standby mode.
Explains the general principles and methods for navigating the device's menu system.
Details the different areas and elements presented on the Vivo 45's display screen.
Describes the various physiological and performance values monitored by the Vivo 45.
Explains the different ventilation, breath, patient, and device modes available on the Vivo 45.
Details the functions and adjustable parameters used for controlling the patient's breathing therapy.
Offers recommendations and procedures for using and managing the device's batteries.
Describes the overall alarm system, including its components and how alarms are signaled.
Details physiological alarms relevant to patient condition and treatment effectiveness.
Lists and explains technical alarms related to device function, power, and sensors.
Provides procedures for testing the functionality and reliability of the device's alarm system.
Provides essential warnings and instructions for safely cleaning the main unit of the Vivo 45.
Details procedures for disinfecting the air pathways to maintain hygiene.
Guides users on how to clean and replace the air filters to maintain device performance.
Outlines guidelines for authorized service personnel regarding device repair and maintenance.
Provides instructions for storing the Vivo 45 device safely and correctly.
Provides an overview of the ventilator system, including leakage port configuration.
Details various data specifications including modes, parameters, and monitored values.
Lists the detailed characteristics and ranges for the ventilator's adjustable parameters.
Details the ranges, resolutions, and tolerances for monitored patient values.
Declares compliance with standards regarding electromagnetic compatibility (EMC).
Lists the default delivery settings for modes, functions, and alarms.
Lists and describes various patient circuits and air delivery accessories for the Vivo 45.
Details power supply units, chargers, and cables compatible with the Vivo 45.
Lists accessories for data monitoring, such as PC software, cables, and sensors.
Lists various filters and detachable parts for the Vivo 45 ventilator.
Lists additional accessories like trolleys, clamps, and holders for the Vivo 45.
To Next Page
