What does 'CAL.Er' mean on my Brecknell MS140/300 Scales and how to fix it?
'CAL.Er' on your Brecknell Scales indicates a calibration error. This can occur if the input data or loaded weight is too small, too big, unstable, or non-linear. Input the correct data and load the correct weight onto the platform. If the issue persists, service is required.
Why won't my Brecknell MS140/300 turn on?
The Brecknell Scales may not turn on due to several reasons: the power cord might not be properly connected or plugged in, the power outlet may not be supplying electricity, or the battery might be discharged. To resolve this, check the power cord connections and ensure it's plugged into a working power outlet. Verify the power source and replace the batteries if necessary. If the issue persists, service is required.
What to do if my Brecknell MS140/300 display 'Ad------'?
If your Brecknell Scales display 'Ad------', it indicates that the loadcell wires to the indicator are incorrectly connected, shorted, or opened, or that the ADC or loadcell(s) are damaged. Ensure the wires are correctly connected and in good condition. If the problem persists, the loadcell or ADC chip may need replacement, which requires professional service.
What to do if my Brecknell MS140/300 Scales cannot zero the display?
If your Brecknell Scales cannot zero the display or will not zero when turned on, it could be due to several reasons. The load on the scale might exceed allowable limits, the load on the scale might not be stable, or there might be load cell damage. Remove any load on the scale and wait for the load to become stable. If the issue continues, service is required.
What does 'EEP.E2' mean on my Brecknell MS140/300 and how to resolve it?
The error message 'EEP.E2' on your Brecknell Scales means that a parameter is not correctly set. To fix this, re-set the parameter.
What does '--------' mean on Brecknell MS140/300 Scales?
The '________' message on Brecknell Scales means the weight reading is below the under load limit. Install the platform on the scale and perform a zero calibration.
What does '________' mean on Brecknell Scales?
The '________' message on Brecknell Scales means the weight reading is below the under load limit. Install the platform on the scale and perform a zero calibration.
What does '0------' mean on Brecknell MS140/300?
The '0______' message on Brecknell Scales means that the weight reading is below the Power On Zero limit. Install the platform on the scale and perform a zero calibration.
What does '0______' mean on Brecknell Scales?
The '0______' message on Brecknell Scales means that the weight reading is below the Power On Zero limit. Install the platform on the scale and perform a zero calibration.
Lists essential operating precautions and safety warnings for the scale.
Outlines technical specs for power, dimensions, display, and keypad.
Details the functions of the four keys on the scale's keypad in normal mode.
Explains operation, powering, HOLD, zero, tare, and clear tare functions.
Detailed descriptions of various setup parameters available in the menu.
Details setup parameters P15 through P19, covering data filter, stability, and overload limits.
Steps to enter and perform calibration using standard weights.
Continues detailed steps for calibration, including setting calibration points.
Lists commands for controlling the scale and their expected responses.
Continues the list of commands and responses for scale communication.
Lists common error symptoms, probable causes, and recommended remedies.
Provides more detailed troubleshooting steps for common issues like power and zeroing.
To Next Page
General
