What to do if my Brecknell Scales will not turn on?
If your Brecknell Scales won't turn on, first check the power cord connections and ensure it's properly plugged into a working power outlet. Also, verify the power source is functioning correctly. If the scale uses batteries, try replacing them. If the issue persists, service is required.
What does 'Ad------' mean on my Brecknell PS2000?
If your Brecknell Scales display shows 'Ad------', it indicates that the loadcell wires to the indicator are incorrectly connected, shorted, or opened, or that the ADC or loadcell(s) are damaged. Ensure the wires are correctly connected and in good condition. If problems persist, the loadcell or ADC chip may need replacement, requiring professional service.
Why can't I zero the display on my Brecknell PS2000?
If your Brecknell Scales cannot zero the display, it could be due to several reasons. First, ensure that the load on the scale is within allowable limits by removing any excess weight. Second, wait for the load to stabilize before attempting to zero the display. If the issue persists, it may indicate load cell damage, requiring professional service.
What does 'CAL.Er' mean on my Brecknell PS2000 Scales?
If your Brecknell Scales display shows 'CAL.Er', it means there's a calibration error. This can occur if the input data or loaded weight is too small, too big, unstable, or non-linear. Ensure you input the correct data and load the correct weight onto the platform. If the problem continues, service is required.
Why does my Brecknell Scales display '--------'?
If your Brecknell Scales displays '--------', it indicates that the weight reading exceeds the overload limit, or the weight value is too large to be displayed in the current unit of measure (exceeding 6 digits). Reduce the load on the scale until the weight value can be displayed. Alternatively, use a more appropriate unit of measure.
What does '0------' mean on my Brecknell Scales?
If your Brecknell Scales displays '0______', it means the weight reading is below the Power On Zero limit. Install the platform on the scale and perform a zero calibration.
What does '0______' mean on my Brecknell Scales?
If your Brecknell Scales displays '0______', it means the weight reading is below the Power On Zero limit. Install the platform on the scale and perform a zero calibration.
What does '________' mean on my Brecknell Scales?
If your Brecknell Scales displays '________', it means the weight reading is below the under load limit. Install the platform on the scale and perform a zero calibration.
What does 'EEP.E2' mean on my Brecknell PS2000 Scales?
If your Brecknell Scales displays 'EEP.E2', it indicates that a parameter is not correctly set. To resolve this, re-set the parameter.
General| Capacity | 2000 lb / 1000 kg |
|---|---|
| Units of Measurement | lb, kg |
| Material | Steel |
| Power Supply | AC adapter |
| Display | LCD |
To Next Page
