Electronic Pocket Balance
User Instructions
Please read all operating instructions carefully before use.
l BEFORE USING, REMOVE THE CLEAR PLASTIC PLATTER COVER AND REMOVE THE INSULATING TAB
FROM THE INSTALLED BATTERY.
l Avoid any exposure to extreme heat or cold, your scale works better when operated at normal room temperature.
Always allow the scale to acclimate to normal room temperature for at least one hour before use.
l Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other
electronic equipment can affect the reliability and accuracy of your scale.
l Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite
durable, try to avoid rough treatment as this may permanently damage the internal sensor.
l Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with
extreme care.
1OPERATION
1. Place scale on a horizontal flat surface, press .
2. Wait until 0.00 is displayed.
3. Put the object(s) to be weighed on the scale top.
2 COUNTING FUNCTION
1. Place 25, 50, 75, or 100 samples of the items to be counted on the scale.
2. Press and hold PCS key for two seconds, then you will one of the sample size choices.
3. Press M key to scroll through the sample size choices. Press PCS key to choose the displayed sample size.
Remove samples from the scale.
4. Place the items to be counted on the scale top. The display will show the actual number of the goods on the
platform.
3MODE
Press the M key to scroll through the units: g/oz/lb/kg/tl/ct.
4 TARE WEIGHING
1. Turn on scale as described above
2. Place the item to be tared on the scale top.
3. Press T key and wait until 0.00 is displayed.
To Next Page
Need help?
General
