BREN-TRONICS, INC.
10 Brayton Court
Commack, NY 11725
P: 631-499-5155 | F: 631-499-5504
www.bren-tronics.com
Page 2 of 25
ALT 170C
(BTC-70844-2)
PR4G WORKSHOP CHARGER
OPERATION MANUAL
850084 REV D
Data presented in this document is subject to change without notice
WARNING
HIGH VOLTAGES ARE PRESENT IN THE
OPERATION OF THIS EQUIPMENT
Avoid contact with AC supply voltage connections during installation, operation
or maintenance of the battery charger.
CAUTION
ACID CONTAMINATES NICKEL-CADMIUM, LITHIUM-ION,
LITHIUM-POLYMER and NICKEL-METAL HYDRIDE BATTERIES
Every effort must be made to keep Nickel-Cadmium, Lithium-Ion, Lithium
Polymer and Nickel-Metal Hydride batteries as far away as possible from Lead-
Acid batteries because Lead-Acid batteries contain sulfuric acid. Do Not use the
same tools and materials, such as screwdrivers, wrenches, syringes,
hydrometers, and gloves for both types of batteries. Any trace of acid or acid
fumes will permanently damage Nickel-Cadmium, Lithium-Ion, Lithium Polymer
and Nickel-Metal Hydride batteries on contact.
WARNING
NO SMOKING IS PERMITTED NEAR THE CHARGING STATION
Batteries can produce explosive gases during charging or discharge cycles.
Never smoke or allow open flames near the charging station.
NOTICE TO PERSONS RECEIVING THIS DRAWING
AND/OR TECHNICAL INFORMATION:
BREN-TRONICS, INC. claims proprietary rights in the material disclosed
herein. This drawing and/or technical information is issued in confidence
for information only and may not be reproduced or used to manufacture
anything shown or referred to heron without direct permission from BREN-
TRONICS INC. to the user. This drawing and/or technical information is
loaned for mutual assurance and is subject to recall by BREN-TRONICS
INC. at any time.
This drawing and/or technical information
is the property of BREN-TRONICS, INC.
To Next Page
Loading...
Need help?
General